Volume; Equalizer; Balance; Headphone - Telefunken TF3236HX880LU Mode D'emploi

Volume

Press the " " or " " buttons to select Volume .
Press the " " or " " buttons to change the level
of the volume.

Equalizer

Press the " " or " " buttons to select Equalizer .
Press the " " button to view equalizer menu.
Press the " " or " " buttons to change the
preset. In the equalizer menu, the preset can
be changed to Music , Movie , Speech , Flat ,
Classic and User .
Select the desired frequency by pressing the
" " or " " buttons and increase or decrease
the frequency gain by pressing the " " or "
" buttons.
Press the " M " button to return to the previous
menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .

Balance

This setting is used for emphasizing left or right
speaker balance.
Press the " " or " " buttons to select Balance.
Press the " " or " " buttons to change the level
of the balance. Balance level can be adjusted
between -32 and + 32.

Headphone

Press the " " or " " buttons to select
Headphone . Press the " " button to view the
headphone menu.
Headphone sub-menu options are described
below:
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 34 A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 34
Volume
Press the " " or " " buttons to select Volume .
Press the " " button to increase headphone
volume level. Press the " " button to decrease
headphone volume level. Headphone volume
level can be adjusted between 0 and 63 .

Headphone Sound (optional)

Press the " " or " " buttons to select Headphone
Sound . Using the " " or " " buttons, you can
select Main, PIP/PAP, Active or Inactive.
Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive
window.

Sound Mode (optional)

Press the " " or " " buttons to select Sound
Mode . Using " " or " " button, you can select
Mono, Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press the " " or " " buttons to select AVL .
Press the " " or " " buttons to set the AVL as
On or Off .

Audio Out (optional)

Press the " " or " " buttons to select Audio Out.
Press the " " or " " buttons to set the Audio Out
as Speaker or LineOut/SPDIF.
If you select the Audio Output as LineOut/
SPDIF, you will get audio through the active
audio connectors. In this case, audio output will
not be available through TV speakers and mute
function cannot be used.
While LineOut/SPDIF is activated, if you press
the volume " " / " " or mute buttons on your
remote control, the Audio Out indicaticator will
be displayed on the screen.
English - 85 -
26.09.2009 17:00:36 26.09.2009 17:00:36