Getting To Know Your Appliance; Installing The Appliance; Aligning The Appliance - Bosch KTW Serie Notice D'utilisation

Masquer les pouces Voir aussi pour KTW Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The illustrations may differ.
Fig. 1
* not all models
1
On/Off button
2
Interior light
3
Light switch
4
Wooden shelf
5
Condensation outlet
6
Temperature selection button
7
Temperature setting display
8
Activated charcoal filter
16
All manuals and user guides at all-guides.com

Installing the appliance

Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use
a suitable insulating plate or observe the
following minimum distances to a heat
source:
3 cm to electric or gas cookers.
30 cm to an oil or solid fuel cooker.
Changing over the door hinges
The door hinges on this appliance cannot
be changed over.

Aligning the appliance

Fig. 2
Place the appliance in the designated
location and align.
The front screw feet can be adjusted.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ksw serie

Table des Matières