Faber ZOOMIS16SS400 Instructions D'installation page 8

2
Use a plumb-line and mark the centre of the cooking hob on the Support Ceiling/Shelf.
• Rest the plate against the ceiling/shelf, taking care to keep the limit pawl that has just been fitted in a
position facing the installer and the cooking hob (the limit pawl must not be confused with the other 4 used
to fix the steel cables that move the Hood).
• Mark on the ceiling the centres of the holes in the plate.
• Drill the following points:
• Ceilings in solid concrete: As per concrete plugs used.
• Ceilings in hollow bricks with 13/16" resistance thickness: Drill a hole ø 6/16" (insert Plugs not supplied).
• Ceilings with Wood Beams: As per Wood Screws used (not supplied).
• Wooden shelf, with a resistant thickness of 9/16": drill a hole ø 4/16".
Insert two screws, crossing them and leaving 3/16" from the ceiling:
• for solid concrete, concrete plugs, not provided.
• for hollow bricks with approx. 13/16" resistance thickness, screws not provided.
• for wooden beams, wood screws, not provided.
• for wooden shelves, screws with washers and nuts, not provided.
8
Ceiling/Shelf drilling and Plate Fixing
CEILING/SHELF DRILLING
3
4X