Allegion MG600-2 Serie Installation

MG600-2/MG1200-2 Series
Electromagnetic Lock User's Guide
Description
The Electromagnetic Lock (Maglock) Series is a surface mounted magnetic lock assembly. Two models are available in double
lock format with 600 and 1200 lb. hold force designed for standard installation on most types of doors.
MG600-2 series
Specifications
DESCRIPTION
Holding Force (lbs)
Lock
Input Voltage (VDC)
Current Draw: @ 12 VDC (amps)
@ 24 VDC (amps)
Relay Rating: @ 120 VAC (amps)
@ 24 VDC (amps)
@ 60 VDC (amps)
Dimensions: inches
(mm)
Weight:
Material: Lock Housing
Armature / Strike Plate
Optional Features:
Precautions
● Shut off all power before attempting any wiring procedures.
● Maintain a clean & safe environment when working in public areas.
● During installation and testing, always be aware of pedestrian traffic around the door.
● ● Always check placement of all wiring before powering up to insure moving door parts will not catch any wires and cause
damage to equipment.
● Ensure compliance with all applicable safety standards and building codes upon completion of installation.
WARNING
Warnings indicate potentially hazardous
conditions, which if not avoided or corrected,
may cause death or serious injury.
MG1200-2
1200
Double
12/24 Selectable 12/24 Selectable
1.000
0.500
N/A
1.0
N/A
21.10 x 2.87 x 1.59 19.68 x 1.86 x 1.02
(536 x 73 x 40.5) (500 x 47.2 x 26)
lbs 21
(kg) 9.6
Aluminum
Zinc Plated Steel Zinc Plated Steel
N/A
Cautions indicate potentially hazardous
conditions, which if not avoided or corrected,
may cause minor or moderate injury. Cautions
may also warn against unsafe practices.
MG600-2 MG1200-2DT
600 1200
Double Double
12/24 Selectable
1.000 1.000
0.500 0.500
N/A N/A
1.0 1.0
N/A N/A
21.10 x 2.87 x 1.59
(536 x 73 x 40.5)
20 21
9.0 9.6
Aluminum Aluminum
Zinc Plated Steel
N/A Door Status and Timer Door Status and Timer
CAUTION
CAUTION
MG1200-2 series
MG600-2DT
600
Double
12/24 Selectable
1.000
0.500
N/A
1.0
N/A
19.68 x 1.86 x 1.02
(500 x 47.2 x 26)
20
9.0
Aluminum
Zinc Plated Steel
NOTICE
Notices indicate a condition that may cause
equipment or property damage only.