Cycle Options - Kenmore 970L8191 Guide D'utilisation Et D'entretien

Operating Instructions
Specialty Cycle Selection
To scroll through the specialty cycles, continue to press the
Specialty Cycles icon. The selected cycle will be shown on
the text display.
Jeans
Select this Auto Dry cycle for drying an entire load of
denim jeans.
Fast Dry
Quickly dry a small load.
Wool
Use the wool cycle with washable woolens - check your
fabric care label to ensure proper garment care. To help
your wool items keep their shape, use of optional drying
rack is recommended.
Time Dry
To manually select the drying time for this specialty cycle,
press the Timed Dry icon. Actual drying time (20 minutes
to 120 minutes) will be displayed.
Because this is not an Auto Dry cycle, you will not be
able to select a dryness level. Moisture sensing bars are
not active and dryer will continue to heat throughout the
cycle until the fi nal cool down period.
Cycle Settings
Appropriate temperature, dryness level and options will be
displayed for each cycle. The settings can be changed before
the cycle is started. If changes are attempted after the cycle
starts a signal will beep and " Not possible " will be displayed.
NOTE
To change settings after the cycle starts, press PAUSE,
adjust the setting and press START to resume the cycle.
Drying Temperature
To change the preset temperature, press the Temp button to
scroll to the desired setting.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
Max
Recommended for durable fabrics and towels.
Medium
Recommended for most cotton fabrics.
Low
Recommended for delicate fabrics.
Dryness Level (Auto Dry)
To change the preset level, press the Dry Level icon to scroll
to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available
with every cycle. If a dryness level is not appropriate for the
cycle, it cannot be selected.
Select the Normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried
at the end of the cycle. To increase drying time for similar
loads in the future, select Max
drying time, select Less
Select Damp for items you wish to partially dry before
hanging or ironing.

Cycle Options

To add options, press the corresponding option's icon to
illuminate the selection desired. To cancel options, press the
option's icon again and the indicator light will turn off . If an
option is not appropriate for the cycle, the indicator will not
light. To protect your fabrics, not all options are available with
every cycle. Not all options are available on every model.
NOTE
To change the options once the cycle has begun, press the
PAUSE button, make the new selection and press START again.
Wrinkle Guard
Select Wrinkle Guard if the dried load might not be
removed promptly at the end of the cycle. The dry load will
continue tumbling without heat to help reduce wrinkling.
When Chime is selected, a beep will be heard periodically.
The load may be removed any time during Wrinkle Guard.
Chime
A signal will sound at the end of the cycle (and periodically
during Wrinkle Guard) if this option is selected.
10
. For loads requiring less
.