Plug The Nvx 200 Cables; Pair Your Mobile With Nvx 200 - Invoxia NVX 200 Manuel Utilisateur

2

Plug the NVX 200 cables

You now need to plug the NVX 200 handset and NVX 200 PSU
Step 1: Plug any end of the RJ11 cable into the handset
Step 2: Plug the other end of the RJ11 cable into the
NVX 200
Step 3: Insert the RJ11 cable into the small aperture in
the NVX 200
Step 4: Plug the power cord in the NVX 200
Step 5: After choosing the right electrical adaptor for
your country between the one provided with your NVX
200, plug the power supply in a power outlet
Step 6: Your NVX 200 is starting. The screen turns on
and displays "invoxia" with a loading bar, the button
led turns blue
3

Pair your mobile with NVX 200

Pair your mobile with NVX 200
With your new NVX 200 turned on, press on the wheel until you hear a "beep". Then stop pressing
and you will hear "Pairing mode, waiting for connection".
You now have a time window to connect your smartphone to the NVX 200. Go in your phone settings
and choose your new NVX in the Bluetooth setting page.
5