Bluetooth; Bluetooth 1St Connection; Multiple Connections: Pairing A New Device / Reconnect A Device; Disconnect A Paired Device - Invoxia NVX 200 Manuel Utilisateur

7

Bluetooth

Bluetooth 1st connection

For iOS devices, make sure your Bluetooth is activated
● For iOS user only: dock or connect via USB your iPhone/iPod/iPad. The Bluetooth
connection is then automatic!
● Or, for iOS and Android devices, long push the volume button until you hear a sound
signal. A «Pairing mode: waiting for connection» message allows you to pair your
NVX 200 in your device Bluetooth menu. A final sound confirms the pairing.

Multiple connections: Pairing a new device / Reconnect a device

For iOS devices, make sure your Bluetooth is activated
● Long push the volume button until you hear a sound signal. A «Pairing mode: waiting
for connection» message allows you to pair your NVX 200 in your device Bluetooth
menu. A final sound confirms the pairing.
● Connecting a previously paired device is easy from its Bluetooth menu. The last
connected device is the controlling device.

Disconnect a paired device

● Long push the volume button until hearing a double-sound signal. The last connected
device is then disconnected and auto-connection is stopped. A «Disconnecting»
message and sound signal confirms the disconnection.
● In your invoxia app, go to Settings > Bluetooth, you can tap «Unpair». The Bluetooth
icon disappears from your screen.

Unpair all the connected devices

● Long push the volume button until hearing a three-sound signal. A «Clearing all
subscriptions» message confirms it.
Also forget the NVX 200 from your device Bluetooth menu in order to complete future
pairings.
9