Yealink IP DECT W56P Mode D'emploi page 5

3. Connect the charger cradle and charge the handset, as shown below:
The handset should be used with original power adapter (5V/600mA) only. The use of the third-
Note:
party power adapter may cause the damage to the handset.
The charging status of the handset is indicated in the top right-hand corner of the LCD screen.
4. (Optional) Mount the charger cradle on the wall, as shown below:
36.00mm
1:1
5. Attach the Belt Clip, as shown below:
E
N
G
L
I
S
H
3