Placing Calls - Yealink IP DECT W56P Mode D'emploi

E
N
Basic Call Features
G
L
I

Placing Calls

S
H
To place a call directly:
1. Do one of the following:
Enter the desired number when the handset is idle.
Press to enter the pre-dialing screen.
Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the
the desired line. If you do not select a line, the handset uses the default outgoing line to dial out.
2. Press , or
To place a call from the local directory:
1. Press  when the handset is idle.
2. Press  or  to highlight the desired entry, and then press
If multiple numbers for the contact are stored, press  or  to highlight the desired number, and
then press
To place a call from the call history:
1. Press the
History
2. Press  or  to highlight the desired entry, and then press
To place a call from the redial list:
1. Press or
2. Press  or  to highlight the desired entry, and then press
To place a call using the speed dial key:
Long press the speed dial key to place a call to preset number directly.
8
to dial out.
or again to dial out using the default line.
soft key when the handset is idle, and then select the desired call history list.
when the handset is idle.
soft key to select
Line
or to dial out using the default line.
or to dial out using the default line.
or .