Feature Pack: Advanced Pc Units - Optelec ClearView+ Guide De L'utilisateur

All manuals and user guides at all-guides.com
+
Optelec ClearView User manual

6 Feature pack: Advanced PC units

This advanced Feature pack is required for optimum operation of the
advanced PC unit.
Semi colours
Pressing this button cycles you through 8 selectable foreground
and background colour combinations (only in high contrast reading
mode). You may choose to display text in a pair of selectable
colours when more contrast is needed or when alternate colour
combinations provide better visibility.
Pointer (position locator)
Pressing this button will switch on an indicator light, which is displayed
in the centre on the reading table. It indicates where the middle of the
onscreen image is located.
Place a pen in the indicator light on the reading table and you will
see the pen displayed in the centre of the image on your screen.
Switch between internal camera and PC / external source
If a PC or other external Optelec source is connected to the
+
ClearView , press this button to toggle between the internal camera
image, Picture-in-Picture (camera image as a window in the
PC image) or a full screen PC image.
Positioning of lines/windows & Picture-in-Picture
When line markers, windows or the Picture-in-Picture are activated,
turning this knob will change the position of the line markers /
windows /or Picture-in-Picture on the screen. Positioning can either
be done horizontally or vertically depending on the status of the
horizontal/vertical button .
Page 10 of 15