Applications; Technical Specifications; Assembly; Plan Figure Of The Machine - MW TOOLS SCIN370 Mode D'emploi

M1.1.SCIN370.NLFREN 13082018
EN

2.3 Applications

• The machine can process the surface of the forging and casting parts, welding parts, pieces after heat treatment, pressing
parts and machining parts to granulate, dismantle, desalt and deburr, meanwhile, surface treatment before electroplating or
painting & coating.
• The machine can also sandblast on the glass surface to achieve rough surface for decorating purpose.
• The machine is suitable to process small parts one after one.

2.4 Technical specifications

Model
Capacity
Working pressure
Connection air hose
Lighting
Capacity worktable
Voltage
Inner dimensions (l x w x h)
Dimensions viewing window
Overall dimensions (l x w x h)

2.Assembly

Net weight
3 Assembly
The machine must be placed on flat floor.
The machine must be placed on flat floor.

2-1 Plan figure of the machine:

3.1 Plan figure of the machine
Dust
collector
Work cabinet

2-2 Compressed air needed:

3.2 Compressed air needed
Push the hose of compressed air into the tie-in of the filter.
Push the hose of compressed air into the tie-in of the filter.
Consumption:（Nozzle I.D.8mm，copper body air hole: I.D.4 mm）
Consumption (Nozzle I.D. 8 mm, copper body air hole: I.D. 4 mm):
Pressure(bar)
Pressure (bar)
Air consumption(m
Air consumption (m³/min)
2-3 Power supply needed:
Input the plug into the socket with power 220V~230V; 50Hz, the socket power
must be earthing.
SCIN370
370 litre
3-8 bar
3/4''
LED
50 kg
230 V
900 x 600 x 800 mm
250 x 450 mm
1020 x 900 x 1670 mm
230 kg
Separator
2.8
2.8
3
/min) 0.51
0.51
4.2 5.6 7.0
4.2 5.6
0.70 0.88 1.07
0.70 0.88
11
7.0
1.07