Description; Working Principle; Features - MW TOOLS SCIN370 Mode D'emploi

Contents
1 Safety .................................................................................................................................................................10
2 Description ..........................................................................................................................................................10
2.1 Working principle ....................................................................................................................................10
2.2 Features .................................................................................................................................................10
2.3 Applications ............................................................................................................................................11
2.4 Technical specifications .............................................................................................................................11
3 Assembly ............................................................................................................................................................11
3.1 Plan figure of the machine .........................................................................................................................11
3.2 Compressed air needed ............................................................................................................................11
3.3 Power supply needed ................................................................................................................................12
3.4 Assembly ................................................................................................................................................12
4 Operation ...........................................................................................................................................................12
4.1 Feeding of abrasive media ........................................................................................................................12
4.2 Regulating the quantity of abrasive (at the bottom of separator) ......................................................................12
4.3 Regulation of compressed air .....................................................................................................................12
4.4 Dust collector ...........................................................................................................................................12
4.5 Operating ...............................................................................................................................................13
5 Common troubles and troubleshooting methods ........................................................................................................13
6 Spare parts .........................................................................................................................................................14
7 Electrical components and circuit diagram ...............................................................................................................15
8 EC declaration of conformity ..................................................................................................................................17
1 Safety
1. Please read this operation manual in detail before operating the machine.
2. Open machine inside by authorized electricity engineering person only!
3. Please shut off the power firstly if you need to repair the machine.
4. Please turn off the power before circuit inspection.
5. Please wear protective eye shield plus surgical mask.
6. Please contact the vendor if any trouble can not be shot.

2 Description

2.1 Working principle

Compressed air flows quickly on the cavity via the air hose, causing vacuum inside sandblast gun, the abrasive media will be
sucked into sandblast gun, then shot out on the surface of the workpieces together with compressed air to achieve the expected
effect according to requirements.

2.2 Features

A. Advanced design, brief & credible structure, easy to operate, good effect with low consumption of energy.
B. Equipped with cyclone separator, which is able to separate the dust from the usable abrasive media efficiently.
C. The main components are of good quality to ensure the safety and use life of the machine.
10
M1.1.SCIN370.NLFREN 13082018
EN