Chicco Kiros-Evo Mode D'emploi page 18

1.3 PRODUCT FEATURES
This child car seat is approved for the safe
transportation of children with a height be-
tween 40-78 cm (from birth up to 13 kg - from
0 to 15 months), in accordance with European
Standard UN/ECE R129
IMPORTANT NOTICE CONFIGURATION
WITH i-Size BASE
This is an "i-Size" child car seat. It is approved
according to Regulation UN/ECE R 129 for use
in vehicles with "i-Size compatible" seats as
indicated by the vehicle manufacturer in the
vehicle's instruction manual and in the vehicle
compatibility list.
In case of doubts, contact the manufacturer of
the restraint device or your dealer.
The vehicle compatibility list can be
found in the product sheet online or by
scanning the QR code on the last page of
this manual.
WARNING! Serious Danger! Do not install the
child car seat on seats where the airbag is ac-
tivated.
IMPORTANT NOTICE CONFIGURATION
WITHOUT THE i-Size BASE
This is a "Universal" child car seat. It is approved
according to Regulation UN/ECE R 129 for use
in vehicles with "Universal" seats as indicated
by the vehicle manufacturer in the vehicle's
instruction manual.
In case of doubts, contact the manufacturer
of the restraint device or your dealer.
WARNING! SERIOUS DANGER! Do not install
the child car seat on seats where the airbag is
activated.
1.4 DESCRIPTION OF THE COMPONENTS
i-Size base
Fig. C
A. Isofix connectors
B. Isofix connector removal lever
C. Isofix system connection indicators
D. Isofix connector release buttons
E. Child car seat fastening slots
F. Child car seat correct fastening indicator
G. Support leg
H. Support leg height adjustment button
I. Leg support correct installation indicator
J. Rebound bar
Kiros Evo i-Size child car seat
Fig. D
X. Handle
K. Hood
L. Fabric cover
M. Reducer cushion
Fig. E
N. Child car seat harness
O. Shoulder straps
P. Buckle
Q. Harness adjustment button
R. Adjustable headrest
Fig. F
S. Waist car safety belt slot on the child car seat
T. Buttons to rotate the carry handle
Fig. G
U. Diagonal car safety belt slot
V. Release handle (from the I-Size base and
stroller)
Z. Headrest and belt adjustment button
1.5 POSITIONS OF THE HANDLE
The child car seat handle can be adjusted to 3
positions (Fig. 1).
A. Position for transportation in the car with
the base and without the base and for car-
rying by hand.
B. Reclined cradle mode position, or for fasten-
ing to an appropriate Chicco stroller.
C. Fixed reclined cradle position.
To adjust the position, press both buttons (T)
on the handle bar together and rotate it to the
desired position until you hear it click into place.
1.6 RESTRICTIONS AND REQUIREMENTS
REGARDING
PRODUCT AND VEHICLE SEAT
The child car seat can be installed in two dif-
ferent ways:
- With the i-Size base (type approval number
030059), which must be used in combination
with the Kiros Evo i-Size car seat, approved
according to standard UN/ECE R129. Before
18
THE USE OF THE