Mitsubishi Electric Mr.SLIM PCA-M HA Serie Manuel D'utilisation page 8

3. Operation
3.5.2 Vane
<[Manual] To Change the Airflow's Up/Down Direction>
■
PCA-M·HA Series
Move the vane to the desired position. (The position of the vane can be
changed within the range from 10
* If the vane is in the downward position during cooling or dry mode, con-
densation may form and drip from the air outlet. If this occurs, adjust the
airflow direction.
* If the cool airflow blows directly onto a flame, cooking table, or food, and
affects the cooking, adjust the airflow direction.
4. Timer
For Wired Remote-controller
■
Timer functions are different by each remote controller.
■
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
5. Care and Cleaning
en
■
Filter information
Room
Cool Set temp.
Mode Temp. Fan
Main Main menu
Maintenance
F1 F2 F3 F4
Maintenance menu
Error information
Filter information
Cleaning
Main menu:
Cursor
F1 F2 F3 F4
Filter information
Press Reset button after
filter cleaning.
Main menu:
Reset
F1 F2 F3 F4
6
° up to 45 ° down.)
Fri will appear on the Main display
in the Full mode when it is time to
clean the filters.
Wash, clean, or replace the filters
when this sign appears.
Refer to the indoor unit Instruc-
tions Manual for details.
Select "Maintenance" from the Main
menu, and press the [SELECT] but-
ton.
Select "Filter information" from the
Maintenance menu, and press the
[SELECT] button.
Press the [F4] button to reset filter
sign.
Refer to the indoor unit Operation
Manual for how to clean the filter.
<[Manual] To Change the Airflow's Left/Right Direction>
* The louver button cannot be used.
Caution:
To prevent falls, maintain a stable footing when operating the unit.
3.6. Ventilation
For LOSSNAY combination
■
The following 2 patterns of operation is available.
• Run the ventilator together with indoor unit.
• Run the ventilator independently.
Filter information
Reset filter sign?
Cancel OK
F1 F2 F3 F4
Filter information
Filter sign reset
Main menu:
Navigating through the screens
• To go back to the Main menu ................ [MENU] button
• To return to the previous screen ........... [RETURN] button
Fri
Room
Cool Set temp.
Mode Temp. Fan
If two or more indoor units are connected, filter cleaning timing for each
unit may be different, depending on the filter type.
The icon will appear when the filter on the main unit is due for
cleaning.
When the filter sign is reset, the cumulative operation time of all units
will be reset.
The icon is scheduled to appear after a certain duration of operation,
based on the premise that the indoor units are installed in a space with
ordinary air quality. Depending on the air quality, the filter may require
more frequent cleaning.
The cumulative time at which filter needs cleaning depends on the model.
Select "OK" with the [F4] button.
A confirmation screen will appear.
When the is displayed on the
Main display in the Full mode, the
system is centrally controlled and
the filter sign cannot be reset.