Eschenbach maxTV Clip Mode D'emploi page 9

Adjustment
The lens of the maxTV Clip is designed for a working
distance of about 3 m.
To attach the maxTV Clip to your eyeglasses, press the clip
together.
When you wish to stop using the maxTV Clip, simply
flip the clip up, it is not necessary to remove it from the
glasses.
To allow an optimal line of sight on both large and small
eyeglasses, the lens assembly on the clip can be moved
vertically. To do this, it is necessary to unscrew the lens
assembly with a small Philips screwdriver and rescrew it
onto the clip arm at one of 5 possible positions.
If you cannot achieve good results with the maxTV Clip,
this may be a result of one of the following situations:
• You may have selected a working distance
that is too far or two short.
• You may be experiencing a vertical offset
because you have attached the maxTV Clip at
too steep an angle.
• Your pupil distance may lie outside of the
pupil distance range of the maxTV Clip.
- 9 -