When it is first powered on, Manual mode is selected, and the setpoint
temperature is set to 19° C.
Boost mode is used to operate the appliance at maximum power
for a period of between 15 and 60 minutes, in order to increase the
temperature quicker.
a
/d
ctivating
To activate or deactivate the BOOST function, press
When BOOST is active, the BOOST indicator will flash.
S
BooSt
etting the
The BOOST time is set by default to 15 minutes. It can be modified to
30, 45 or 60 minutes, using these buttons
the BOOST countdown (in minutes) will be displayed.
When the BOOST time has elapsed, the appliance will
return to the previous mode. To exit BOOST mode
before the end of the programmed time, press
S
M
electing
short
press
S
etting the teMperature
Use
the
perature).
INITIAL SWITCH-ON
Press any button to activate the display.
BOOST MODE
eactivating the
tiMe
MANUAL MODE
anual Mode
buttons to set the setpoint temperature (desired tem-
Use
BooSt
function
28
. After a few seconds,
.