Cleaning; Storage; Disposal - Zipper Maschinen ZI-WP400TN Mode D'emploi

16.3 Cleaning

The use of paint thinners, petrol, aggressive chemicals or scouring agents will damage
the plastic surfaces! Therefore, only use mild cleaning agents for cleaning! Make sure
that no water seeps into the machine!
Clean the machine after each use. Wipe it with a clean, damp cloth or blow off dust and material
residues with compressed air at low pressure. Keep all safety devices, ventilation openings and the
motor housing as free as possible from dirt and dust. Make sure that no water can enter the
machine. The entry of water into a power tool increases the risk of electric shock.

16.4 Storage

• Disconnect the power plug
• Store unused machines in a dry, locked place out of the reach of children.
To extend the service lifespan of the machine and ensure smooth operation, carry out the following
before storing it for a longer period of time:
• Clean the machine thoroughly.
• Treat all moving parts with an environmentally friendly oil.
Never use grease! Do not oil the engine!

16.5 Disposal

Observe the national waste disposal regulations. Never dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your
local authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer, he
is obliged in certain countries to dispose of your old machine properly.
ZIPPER MASCHINEN GmbH
ZI-WP400TN
www.Zipper-Maschinen.at
7. Dismantle the M20×1.5 nut and the front
clamping flange. Remove the old saw blade.
NOTICE
MAINTENANCE
38