CARE & CLEANING
Removing Tannin Stains without Revive
Organic Tea Cleaner
1.
Fill the Tea Maker with 1500ml water
and one of the following:
a) Juice of one lemon, as well as
the lemon.
b) 2 tablespoons of baking soda.
c) 6 tablespoons of white vinegar.
2.
Select 212°F (100°C) and press the
HOT WATER|Cancel button to boil.
Allow to cool. For best results, leave to
soak overnight.
3.
Discard the solution then scrub with a
soft bristled brush (non metallic). Fill the
Tea Maker with clean water, boil, then
discard the water. For best results, repeat.
4.
Thoroughly rinse the Tea Maker with tap
water before use.
NOTE
Through regular use over time, scale
build-up can affect the performance
and the life of the Tea Maker. Lime
and phosphate are common forms
of scale that can damage your Tea
Maker. Lime scale, a harmless mineral,
comes in the appearance of white-
colored or rusty looking build up on
the inner walls and inner base of the
Glass Jug. Phosphate scale can't be
seen, however, it can cause the water
to appear cloudy when heated. To
prevent scale from damaging your
Tea Maker, ensure to de-scale the
Glass Jug regularly. Use a commercial
de-scaling agent and follow the
instructions that come with the agent.
BTM800XL_IB_H13.indd 29
Cleaning the Tea Basket Lid, Tea Basket
and Tea Scoop
1.
Wash the Tea Basket Lid, Tea Basket and
Tea Scoop in warm soapy water with a
soft sponge, rinse and dry thoroughly.
A non-abrasive liquid cleanser or mild
spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the accessory surfaces,
before cleaning.
2.
Alternatively, these accessories are
dishwasher safe.
3.
Let all surfaces dry thoroughly prior
to using.
Cleaning the Power Base
1.
Wipe the Power Base with a soft
damp sponge.
2.
Let all surfaces dry thoroughly prior to
inserting the power plug into a
wall outlet.
Storage
1.
Ensure the Tea Maker is switched off,
cleaned and dried before storing.
2.
Ensure that the assembled Tea Basket is
securely attached to the magnetic post
within the Glass Jug.
3.
Ensure that Jug Lid is securely in place.
4.
Wrap the power cord around the power
cord storage under the Power Base.
5.
Stand the Tea Maker upright on the
Power Base. Do not store anything on top.
29
17/09/13 4:48 PM