Brewing Tea; Boiling Water - Breville the Smart Tea Infuser BTM600 Manuel D'instructions

BREWING TEA

1. Fill the glass jug with desired amount of
water. Ensure you do not fill past the MAX
mark. Place the outer lid, tea basket, and
inner lid.
2. Select the tea type by pressing the TEMP
button. The tea type determines brew
temperature and steep time, based on
medium strength. The Breville Smart Tea
Infuser™ has 5 preset tea types
recommended for optimal brewing of
Green, White, Oolong, Herbal, or Black tea.
TEA TYPE
Green White Oolong Herbal Black
Preset Brew
175˚F 185˚F 195˚F 205˚F 212˚F
Temp
2
Mild
Steep
Time
* 3
Medium
(mins)*
4
Strong
* Preset steep time is based on medium strength,
but you can adjust depending on your taste.
NOTE
This product is not calibrated for commercial
or scientific use. Temperatures may vary ± 3˚C,
which is within range for optimal brewing for
each tea variety.
3. Start heating by pressing START/STOP
button. The Breville Smart Tea Infuser™
will start heating.
4. Once the selected brew temperature is
reached it will beep 3 times. Open the tea
basket lid by pressing the detachment
button and use a tea spoon (approximately
5g) to fill the basket with tea leaves. As a
general guide, use 1 teaspoon of tea leaves
per cup / 250ml of water, however this will
depend on the instructions on tea
packaging and your personal preference.
Re-place the tea basket lid.
10
2 2 3 1
3 3 4 2
4 4 5 3
WATER TO TEASPOON RATIO
500mL/16oz
750mL/24oz
1000mL/32oz
1250mL/40oz
1500mL/48oz
1700mL/56oz
5. Start steeping by pressing the START TIMER
button. The timer is set based on medium
strength by default, but you can change this
by pressing STEEP TIME button.
NOTE
Temperature and time can be changed
during heating or steeping cycle.
6. Once brewing cycle is complete, the Breville
Smart Tea Infuser™ will beep 3 times. Lift
the inner lid along with tea basket, and detach
the tea basket. Then close the lid. Your tea is
ready now. The Breville Smart Tea Infuser™
will keep the tea warm until you are ready
to drink.
NOTE
Keep warm will last for 30 minutes after
the tea is brewed. When the glass jug is
removed from the power base, it will stop
keep warm function.

BOILING WATER

Remove the tea basket and fill the glass jug with
water. Close the jug with the lid. Select the
desired temperature by pressing TEMP button,
and then turn off time indicator by pressing
STEEP TIME button. Press START/STOP
button to start. When finished, it will beep
3 times.
CHANGING BEEP VOLUME
Press and hold STEEP TIME button and
TEMP button together for 2 seconds to enter
volume adjustment mode. Press STEEP TIME
button to choose among OFF (mute), 3 (default),
and 5 (louder). To save and exit, press the two
buttons together or wait for 7 seconds.
2 teaspoons
3 teaspoons
4 teaspoons
5 teaspoons
6 teaspoons
7 teaspoons