Tips For Optimal Tea Brewing; Preparing The Tea Maker For Use - Breville the Tea Maker BTM800XL Manuel D'instructions

BEfORE fIRST USE Of yOUR BREvILLE PROdUCT

TIPS fOR OPTIMAL TEA BREWING

• Water quality affects taste. For best
results, use filtered water.
• Finer tea particles and leaves will
infuse more quickly than whole leaves.
As a result, finer tea particles often
release too much tannin too quickly,
creating a harsher taste. Adjust the
brewing time until desired strength
is achieved.
• Using the tea scoop provided,
spoon roughly one scoop of tea
per cup / 8oz / 250ml of water.
WATER TO TEA SCOOP RATIO
GLASS JUG CUPS /
MARKING OUNCES
500mL Approx.
2 Cups / 16oz
750mL Approx.
3 Cups / 24oz
1000mL Approx.
4 Cups / 32oz
1200mL Approx.
5 Cups / 40oz
PREPARING THE TEA MAKER
fOR USE
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
1. Remove and safely discard any packing
material, promotional labels and tape
from the Tea Maker.
2. Remove the Jug Lid then remove the
Tea Basket from the magnetic post
within the Glass Jug. Wash the Jug Lid,
Tea Basket, Basket Lid and Tea Scoop
in warm soapy water with a soft sponge,
rinse and dry thoroughly.
12
BTM800XL_IB_H13.indd 12
Never immerse the base of the Glass
Jug, the Power Base, power cord or
power plug in water or allow moisture
to come in contact with these parts.
3. Place the Power Base on a flat,
dry surface.
4. Without the Tea Basket in place, fill the
Glass Jug to the water maximum mark
(1500mL WATER MAX) and place on
the Power Base. Securely fit the Jug Lid
onto the Glass Jug.
TEA
Never fill the glass jug with chilled
SCOOPS
water. Allow the tea maker to cool
2 Scoops before refilling.
Filling past the 'MAX' line may result
3 Scoops
in serious burns or injuries as a result
of overflowing hot or boiling water.
Filling below the 'MIN' line will result
4 Scoops
in the tea maker switching off before
the water has boiled or reached the
5 Scoops
selected temperature
5. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
6. The LCD screen will illuminate with
the default brew temperature and brew
time display.
WARNING
WARNING
17/09/13 4:48 PM