AUTO START
NOTE
Once a customized time has been
selected and one tea making or water
heating cycle has been activated,
the customized time will remain in
the memory of the Tea Maker until
you change it. To return to default
settings, see Page 32.
AUTO START fEATURE
This feature allows you to program the
specific time when the Tea Maker will
automatically turn on and start either a tea
brewing cycle or water heating cycle.
Setting the 'Auto Start' feature
1.
Select the desired tea type and
tea strength.
2.
Press and hold the AUTO START
button until the LCD screen displays
the
AUTO START clock symbol
and a blinking CURRENT TIME and
START TIME. The button surround will
illuminate and the tea alert will sound.
3.
To set the CURRENT TIME, press the
left
ARROW UP button to increase
the time, or the left
button to decrease the time in 1 minute
increments. Ensure the correct 'AM' or
'PM' is displayed.
NOTE
Pressing and holding the
UP button or
will increase the scrolling speed.
22
BTM800XL_IB_H13.indd 22
ARROW DOWN
ARROW
ARROW DOWN button
4.
To set the START TIME, press the right
ARROW UP button to increase the
time, or the right
button to decrease the time in 1 minute
increments. Ensure the correct 'AM' or
'PM' is displayed.
5.
Once current time and start time are
programmed, press either the flashing
HOT WATER|Cancel or TEA|Cancel
button to select which feature you would
like to start at the programmed time.
6.
The LCD screen will display the current
time and start time, in addition to the
AUTO START symbol. The AUTO
START button surround will illuminate
and remain illuminated until the START
TIME is reached, indicating that the
'Auto Start' feature has been activated.
7.
Ensure that the Tea Maker is
prepared with:
a)
Sufficient water in the Glass Jug and tea
leaves in the Basket for the tea brewing
cycle or,
b)
Sufficient water in the Glass Jug for the
water heating cycle.
8.
Once the selected START TIME
is reached, the Tea Maker will
automatically commence the tea
brewing or water heating cycle. During
this time, the AUTO START button
surround will no longer illuminate until
the cycle is complete.
ARROW DOWN
17/09/13 4:48 PM