Note On Standby Mode; Moving The Tea Basket After The Brewing Cycle - Breville the Tea Maker BTM800XL Manuel D'instructions

AUTO START
Re-selecting the 'Auto Start' feature using
previous START TIME
1. Press the AUTO START button
once. The HOT WATER|Cancel and
TEA|Cancel buttons will flash.
2. Press either the HOT WATER|Cancel or
TEA|Cancel button to re-select the the
desired function. The 'Auto Start' feature
has now been re-set.
NOTE
The 'Auto Start' feature can be canceled
anytime by pressing the AUTO START
button. The LCD screen will no longer
display the AUTO START symbol and
the AUTO START button surround will
cease to illuminate.
A NOTE ON STANdBy MOdE
When the Tea Maker is plugged into a wall
outlet, the LCD screen will illuminate for
3 minutes before entering standby mode.
When in standby mode, the LCD screen will
cease to illuminate.
To re-activate the Tea Maker out of standby
mode, press any button, except the HOT
WATER|Cancel or TEA|Cancel button
on the Power Base. The LCD screen will
re-illuminate. Pressing either the HOT
WATER|Cancel or TEA|Cancel button will
start the respective operation immediately.
BTM800XL_IB_H13.indd 23
MOvING THE TEA BASKET AfTER
THE BREWING CyCLE
After the brewing cycle is complete, you
may wish to lower the Tea Basket again
for extra infusion to produce a stronger
tasting tea. To do this, press and hold the
BASKET button for 2 seconds. The button
surround will flash and the Tea Basket will
automatically lower to the bottom of the
Glass Jug.
Once the desired strength has been reached,
press and hold the BASKET button for
2 seconds. The button surround will flash
and the Tea Basket will automatically rise to
the top of the Glass Jug.
NOTE
If the Glass Jug is removed from the
Power Base and the Tea Basket is in the
lowered position, it will automatically
return to the top upon return of the
Glass Jug to the Power Base.
23
17/09/13 4:48 PM