Publicité
Les langues disponibles
Les langues disponibles
SETTING UP YOUR HUMIDIFIER
Unpack the Humidifier
Keep this Owner's Manual for reference.
Remove packaging materials. Remove twist tie from power cord and
extend power cord to full length.
Ensure proper assembly. Remove Tape and be sure components are
in place.
Place on a firm, level, water resistant surface a minimum of 12" (30cm)
from any walls. Mist should be directed away from any walls, bedding
and furniture.
WARNING: KEEP OUT OF REACH OF CHILDREN. THIS PRODUCT PRODUCES HOT STEAM AND
SHOULD BE PLACED IN AN AREA NOT ACCESSIBLE TO CHILDREN OR PETS, WITH THE POWER
CORD OUT OF REACH.
FILLING / REFILLING
NOTE: Tank should be carried using two hands; one hand on the Tank Handle and the other supporting the
bottom of the tank.
Kaz USA, Inc. will not accept responsibility for property damage caused by water spillage.
This humidifier holds 1.2 gallons (4.5L) of water (tank and reservoir combined).
Filling
1
1.
Remove Water Tank and turn upside down. Remove Tank Cap by turning counter clockwise (left).
Fill Tank with cool water. DO NOT fill with warm or hot water.
2.
Replace Tank Cap by turning clockwise (right), aligning arrow to lock symbol. Be sure Gasket is
in place.
3.
Place Tank on Base. Water will drain from the Tank into the Reservoir when the Plunger
is engaged.
2
3
1 2 "
( 3 0
c m
)
5
Publicité
