Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
■ A level floor with a maximum slope of 1" (2.5 cm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.
■ A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 lbs (180 kg).
Do not operate your washer in temperatures below 32°F (0°C).
Some water can remain in the washer and can cause damage in
low temperatures.
Installation clearances
■ The location must be large enough to allow the washer door
to be fully opened.
■ Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90° and
it is not reversible.
■ Additional clearances might be required for wall, door, and
floor moldings.
■ Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.
■ Companion appliance spacing should also be considered.
50"
(127 cm)
Washer Dimensions
Recommended installation spacing for custom
undercounter installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
37" min.
(93.9 cm)
6
Kenmore_Washer_Good-02681B-02_EN.indd 6
All manuals and user guides at all-guides.com
27"
(68.6 cm)
38.2"
(97.1 cm)
31"
(78.6 cm)
Door is not reversible
1"
27"
1"
(2.5 cm)
(68.6 cm)
(2.5 cm)
Recommended installation spacing for recessed or closet
installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
48 In.
48"
(310 cm
(122 cm)
24 In.
(155 cm
1"
29¼"
4"
(2.5 cm)
(80 cm)
(10.2 cm)
A
A. Side view - closet or confined area
B. Closet door with vents
* Min. top and bottom air openings for closet door.
Recessed or closet installation - Washer on pedestal
1"
27"
(2.5 cm)
(68.6 cm)
(2.5 cm)
A
A. Recessed area
B. Side view - closet or confined area
3"
(7.6 cm)
2 *
2
)
2 *
3"
)
2
(7.6 cm)
B
38" min.
(97 cm)
1"
1"
29¼"
4"
(2.5 cm)
(80 cm)
(10.2 cm)
B
2009-07-23 ¿ÀÈÄ 4:17:58
Publicité
Chapitres
Table des Matières
Dépannage
