(15) RECORD output (REC OUTPUT)
You can connect the input of a cassette deck for recording to this stereo cinch output.
The red cinch socket is the right and the white cinch socket the left output.
The MASTER output signal is switched on the REC output.
(16) MASTER output (MASTER OUTPUT)
The MASTER signal (mixed audio output signal) is switched on this output.
Connect the input of your amplifier to this stereo cinch output.
The red MASTER cinch socket is the right and the white MASTER cinch socket the
left output.
(17) Low-voltage socket
This socket serves for connecting the voltage supply. Plug the low-voltage plug of the
supplied power pack in here. Do not use any other power pack for voltage supply.
(18) Ground screw clamp
To avoid humming sounds, you can establish a ground connection between the mix-
ing desk and the turntables via the screw clamp (18).
(19) Mounting holes
You can attach the mixing desk with these four mounting holes when installing it in a
rack.
(20) Power pack
The power pack serves for the voltage supply of the mixing desk.
(21) Low-voltage plug
The low-voltage plug is plugged into the low-voltage socket (17) of the mixing desk.
Installing the Appliance
When selecting the installation site for the appliance, make sure that it will not be
exposed to direct, intensive sunlight, vibrations, dust, heat, cold and dampness.
There may not be any strong transformers or motors in proximity to the mixing desk.
The mixing desk was designed for installation in a rack but can also be placed on a
table. The four mounting holes (19) in the top cover serve for rack mounting.
28
All manuals and user guides at all-guides.com
Non-compliance with this sequence may damage the loudspeakers or the
amplifier.
Maintenance and Disposal
Maintenance
Check the technical safety of the appliance at regular intervals, e.g. for damages of
the casing, the power pack, etc.
If safe operation can no longer be assured, put the appliance out of operation and
protect it from being used again accidentally!
Safe operation can no longer be assumed if
• the appliance/power pack or the cable of the power pack shows visible damages
• the appliance/power pack no longer functions
• after long storage under adverse conditions or
• after heavy transport strain.
Make sure you observe the following safety notices prior to cleaning or servicing the
product:
This appliance is maintenance-free and may not be opened! The guarantee expires
when you open the appliance.
Only clean the outside of the appliance with a soft, dry cloth or a brush. Do not use
any aggressive cleaning agents or chemical solutions as these may damage the sur-
face of the casing or impair the function of the appliance.
Disposal
Dispose of obsolete appliances according to the valid legal directives.
Do not listen to music with an excessive volume over longer periods of
time, especially not via headphones, as this damages your hearing.
Always pull the power plug out of the socket!
Repairs/opening the appliance may only be conducted by experts
who are familiar with the associated risks respectively the perti-
nent regulations.
You have to disconnect all connected appliances from the mains
prior to performing maintenance or repair work.
33