Electrolux EWF 128500 W Notice D'utilisation page 19

7. Remove foreign bodies and fluff from
the pump impeller.
8. Check carefully whether the pump im-
peller rotates (it rotates jerkily). If it
doesn't rotate, please contact the
Service.
9. Replace the filter into the pump by in-
serting it correctly into the special
guides.
Screw firmly the filter.
2
10. Close the pump door.
Caution! When the appliance is in use
and depending on the programme
selected there can be hot water in the
pump.
All manuals and user guides at all-guides.com
1
Never remove the filter during a wash
cycle.
Always wait until the appliance has fin-
ished the cycle, and is empty.
When refitting the filter, ensure it is se-
curely re-tightened so as to stop leaks
and young children being able to re-
move it.
CLEANING THE WATER INLET
FILTERS
If the appliance doesn't fill, takes long
to fill with water, the starting button
blinks red or the display (if available)
shows the relevant alarm (see chapter
"What to do if..." for more details),
check if the water inlet filters are
blocked .
To clean the water inlet filters:
1. Turn off the water tap.
2. Unscrew the hose from the tap.
3. Clean the filter in the hose with a stiff
brush.
4. Screw the hose back onto the tap.
Make sure the connection is tight.
5. Unscrew the hose from the machine.
Keep a rag nearby because some wa-
ter may flow.
Clean the filter in the valve with a stiff
brush or with the piece of cloth.
electrolux 19