Ezviz mini CV-100 Serie Guide Rapide page 7

Installation
1
Installing the Metal Plate (Optional)
Pick a clean and flat surface and secure the metal plate to the
desired position with the foam stickers or screws (not included.)
There's a magnet piece inside the camera. You can skip this step
if the surface is made of metal.
2
Installing the Camera
Secure the camera magnetically to the metal plate or metal
surface (see figure below).
Troubleshooting
Q:
"The device is offline." or "The device is not registered." prompts
appear when adding the camera using the EZVIZ International
app.
A:
1. Make sure the network is connected properly and the router's
DHCP is enabled.
2. Press and hold the RESET button for 3 seconds to reset the
settings anytime you have changed the network settings.
Q:
The mobile device is not receiving instant alerts when the
camera is online.
A:
1. Make sure the EZVIZ International app is running on your
mobile device.
2. For Android devices, make sure the app is running in the
background; and for iOS devices, enable the push
notifications in "Settings > Notification".
Q:
Does the camera run on batteries or other USB-powered
devices?
A:
Best used with the EZVIZ standard power adapter to provide a
stable voltage supply.
6