Ezviz mini CV-100 Serie Guide Rapide page 6

3
To Change the Default Password
After adding the camera, you are required to change the device
password to ensure your video security.
- Locate the verification code as your default password on the
label at the back of the camera.
- Go in the Device Settings interface in the app and tap on the
Change Password.
- Enter the verification code as the old password, and type a
new password.
4
To Initialize the microSD Card
- Check the microSD card status by tapping on the Storage
Status in the Device Settings interface.
- If the microSD card status displays as Uninitialized, tap to
initialize it. The status will then change to Normal. You can
then start recording any event triggered video in the camera
such as motion detection.
Model: XXXXXX
Power Consumption: XXX
FCC ID:XXXXXXX IC:XXXXXX
SN: XXXXXXX MM/YYYY
Verification Code: XXXXXX
5
Model: XXXXXX
Power Consumption: XXX
FCC ID:XXXXXXX IC:XXXXXX
SN: XXXXXXX MM/YYYY
Verification Code: ABCDEF