Electrolux ESV243C1WAI Manuel D'utilisation page 11

• For some models, there have
no fan speed values showed
between AU-100%.
6. SWING BUTTON
Press the button to stop or start vertical
louver movement or set the desired left/
right air flow direction.
Press the button more than 2 seconds to
stop or start horizontal louver auto swing
feature.
Default setting: OFF.
7. TURBO BUTTON
In COOL or HEAT mode, press the button
to enable or disable the turbo function.
If the turbo function is enabled, the unit
will operate at turbo speed to cool or heat
rapidly so that the ambient temperature
approaches the set temperature as soon
as possible.
8. SLEEP BUTTON
Press the button to enable or disable
Sleep function. If the Sleep function is
enabled, the Sleep symbol "
shown. Default setting: OFF.
8 . ECO/GEAR BUTTON
1
Press the button to activate the ECO or
GEAR energy efficient mode.
9. TEMP BUTTON
Press the button to increase/decrease the
temperature. Keep the button pressed for
two seconds to accelerate the process.
Temperature range: 16-30°C (60-86°F).
Temperature range (30-36K models): 17-
30°C (62-86°F).
Temperature range (UAE models): 20-
28°C (68-82°F).
In Timer function, use the button to set the
timer adjustment.
10. TIMER BUTTON
Press the button to set the timer function
for switching on/off the unit.
See section "How to use the remote
controller" for the Timer function
description in details.
11. FRESH BUTTON
Press the button to enable/disable the
fresh function. Default setting: OFF.
11 . BREEZE AWAY BUTTON
1
Press the button to enable the Breeze
Away function. Default setting: OFF.
11 . SHORT CUT BUTTON
2
Press the button to enable Short cut
function.
12. SELF CLEAN BUTTON
Press the button to enable/disable the self
clean function. Default setting: OFF.
13. LED BUTTON
Press the button to switch the display of
the indoor unit on or off. Default setting:
ON.
14. MODE DISPLAY
Displays the current selected mode.
Including AUTO, COOL, DRY, HEAT and
FAN.
15. TRANSMISSION INDICATOR
" will be
Displays when the remote controller
transmits signals to the indoor unit.
16. TIMER-ON DISPLAY
Displays when the Timer-On function is
enabled.
17. TIMER-OFF DISPLAY
Displays when the Timer-Off function is
enabled.
18. FAN SPEED DISPLAY
Displays the selected fan speed: AUTO,
LOW, MED and HIGH. When AUTO or
DRY Mode is selected, the signal "AUTO"
will be displayed.
19. QUIET DISPLAY
Displays when Quiet function is activated.
The unit will run with the lowest fan speed.
20. SWING UP/DOWN DISPLAY
(OPTIONAL)
Displays when Swing function is activated,
display matched symbol if you select
differnent up/down direction.
ENGLISH 11