HumanTechnik SWING digital Mode D'emploi page 31

Connect transmitter to the digital Toslink connector
optical
optical
MIC CONNECT
AUDIO
AUDIO
optical
MIC
25
24
34
Remove protective ends from TOSlink cable. Connect the optical Toslink
cable 34 to the "optical" connection 24 of the transmitter and connect it with
your source of sound. The switch 25 must be set to "optical".
NOTE: Your TV digital output must be set to PCM audio.
This would be found in the Audio setup of the TV menu system.
Connect transmitter to the mains supply
Connect the provided power supply to the transmitter using the power supply
connection "DC12V". The power supply needs to be connected to an electri-
cal outlet.
Please charge the receiver with the battery installed in the receiver for 6 hours
before commissioning the device for the first time.
English 31