HumanTechnik SWING digital Mode D'emploi page 30

Connect transmitter headphone connector
26
29
Plug the provided audio connection cable 29 into the green "Audio" female
connector 26 of the transmitter. Plug the audio connection cable 29 into the
headphone connection of your sound source.
You may need the 6.3 mm headphone plug adapter for the connection of the
headphones to your sound source. Set the volume of your sound source to an
average volume.
Connect the transmitter to the microphone (optional)
27
33
The microphone is not included in the contents. It can be purchased from
your retailer.
Plug the microphone 33 into the black "MIC" connection 27 of the transmitter.
Fasten the microphone to the loudspeaker of your sound source.
English 30