Pairing Of Transmitter And Receiver - HumanTechnik SWING digital Mode D'emploi

Pairing of transmitter and receiver

If you want to add an additional receiver to the transmitter then the new re-
ceiver must first be paired with the transmitter. This is required to ensure that
transmitter and receiver recognize each other and that they can transmit the
encrypted data.
This is only required once for each set of headphones. A maximum of 4 sets
of headphones can be paired with one transmitter.
If the headphones do not find a transmitter, then the red LED 4 blinks and no
signal will be received.
Please follow these instructions to pair the receiver with the transmitter:
1. Ensure that the transmitter is connected to an electrical outlet and that it
is provided with electricity.
2. Wear the receiver to ensure that it is switched on. For the SWING digital
LR version switch the LR receiver on.
3. Press the "Connect" button 28 briefly at the transmitter. The blue LED bar
starts flashing.
4. Press the "Connect" button 5 / 14 briefly at the receiver to complete the
pairing.
5. Once the paring has been completed, the transmitter will stop flashing.
English 34