AL-KO Mr Gardener 1234 P Mode D'emploi page 66

GB
EC declaration of conformity
We hereby declare that this product, in the form in which it is marketed,
meets the requirements of the harmonised EU guidelines,
EU safety standards, and the product-specific standards.
Product
Electric lawn mower
Serial number
G1001005
Model
1234 P (34cm)
1440 P (40cm)
Sound power level
measured / guaranteed
88 / 90 dB(A)
1234 P (34cm)
92 / 94 dB(A)
1440 P (40cm)
Warranty
If any material or manufacturing defects are found during the statutory customer protection period, we will either repair or
replace the equipment, whichever we consider the more appropriate. This statutory period may vary according to the legisla-
tion in force in the country where the equipment was purchased.
Our warranty is valid only if:
The equipment has been used properly
„
The operating instructions have been followed
„
Genuine replacement parts have been used
„
The following are not covered by warranty:
Paint damage due to normal wear
„
Wear parts identified by a border
„
Combustion motors – these are covered by a separate warranty from the manufacturer concerned
„
To make a claim under warranty, please take this statement of warranty and proof of purchase to the nearest authorised
customer service centre. This warranty does not affect the usual statutory rights of the customer relative to the seller.
66
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
EU directives
98/37/EG (...2009-12-28)
2006/42/EG (2009-12-29...)
2006/95/EG
2004/108/EG
2000/14/EG
Conformity evaluation
2000 /14/EG
Appendix VIII
Notified body
TÜV Industrieservice GmbH
TÜV Süd Gruppe
Westendstraße 199
80686 MUENCHEN
DEUTSCHLAND
The warranty is no longer valid if:
The equipment has been tampered with
„
Technical modifications have been made
„
The trimmer was not used for its intended purpose (for exa-
„
mple, used for commercial or communal applications)
┌──────┐
XXX XXX (X) on the spare parts list
└──────┘
Executive Officer
Anton Eberle
Ichenhauser Str. 14
89359 KOETZ
DEUTSCHLAND
Harmonised standards
EN 60335-1
EN 60335-2-77
Kötz, 2009-11-13
Antonio De Filippo, Managing Director