Indicator Light; Output Voltage - patura P 20 Notice D'emploi

Rotary switch settings
OFF
OFF
Setting Mode
OFF
OFF
OFF
OFF
OFF
BATTERY TEST
SLOW
NIGHT SAVE
(slow at night)
HALF POWER
(fast)
FAST POWER
(fast)
Reading the output voltage
The three indicator lights show the output voltage of the energiser when it is operating
(except when it is on position BATTERY TEST).

Indicator light

Top: GREEN
Middle: GREEN
Bottom: RED
Testing the voltage of a 9 V battery (
If the energiser is operating in SLOW, NIGHT SAVE, HALF POWER or FULL POWER mode and the
battery voltage falls below 5.5 V, the energiser will automatically switch to HALF POWER mode
and deliver a pulse once every 2.5 seconds.
You can test the battery voltage at anytime. Turn the rotary switch to BATTERY TEST mode.
The three indicator lights now show the battery voltage.
Description
The energiser is off and is not operating.
The indicator lights show the battery level.
Note: The energiser does not operate
in BATTERY TEST mode.
The energiser is operating at full power on SLOW
speed (pulses every 2.5 seconds)
The energiser is operating (on FULL POWER) at
SLOW speed at night (pulses every 2.5 seconds)
and FAST speed during the day (pulses every
1.5 seconds)
The energiser is operating at HALF POWER
(and FAST speed).
The energiser is operating at FULL POWER
(and FAST speed).
Status
Flashing
Flashing Between 2500 and 4900 volts
Flashing
Type 6AS3)

Output voltage

5000 volts and more
2500 volts or less
43