Superior SONIA Instructions Pour L'installateur page 11

- Secure the fan (1) with the 3 screws (5) supplied.
Fig. 15
5
LIA - LISA - SONIA - MILLY - SEFORA - MINA.
- Use a set of pliers to bend the side tab on the guard (3) as indicated
opposite.
Fig. 16
- Thread the cable (4) through the guard (3) hole and connect its
terminals to the fan (1) as shown in the wiring diagram.
Fig. 17
1
- Secure the guard (3) with the screws (5) supplied.
Fig. 18
3
DT2034215-00
3
DT2034066-00
3
4
DT2034067-00
5
DT2034129-00
H07031710 / DT2002252 – 04
- Fix the cable using the clamp (7) supplied, as shown opposite.
Fig. 19
SONIA - MILLY - SEFORA - MINA.
- Place the latch fastener (6) in the points indicated and thread the
cable.
Fig. 20
a Make sure that the cable does not come into contact with
parts that heat up.
LIA - LISA.
- Place the latch fastener (6) in the points indicated and thread the
cable.
Fig. 21
7
DT2033962-00
6
DT2034119-00
6
DT2034069-00
11