BH Tecnovita YR40 Mode D'emploi Et Garantie page 11

3. Insert AAA type batteries (2 units) and close the cover;
4. Place the remote back in the remote holder.
APPLICATION
1. Wear the pants and adjust the size through the fastening part
(Velcro);
2. Put the device into the device holder on the pants with two snaps
on buttons;
3. Push ON/HI button to turn on the device. To switch the device off
press the OFF/LOW button.
4. Pressing the "MODE" button repeatedly to select the mode you
wish. The LCD display will show the mode which you have
selected. (This button will only be effective when the device is
connected to the pants and in touch with the skin).
INTESITY ADJUST
Push the ON/HI or OFF/LO button to carefully increase or decrease the intensity.
The LCD display will show the intensity level which you have selected. (This
button will only be effective when the device is connected with the attachment and
it touch on the skin) You will notice a tingling sensation prior to the muscle
contracting. Once the muscle is contracting will be pleasant and relaxing. Adjust
the intensity according to your comfort level.
comfortable contraction of the muscles.
When the conductive area (SILICON PADS) of the pants does not touch the skin,
the intensity can only be set up to "1".
If the pants are removed during use, the intensity is automatically reset to "1". If
the attachment is not placed back into contact with the skin, the unit will turn off
after 30 seconds. The unit has an auto-timer. It will shut off after 10 minutes of
massage. If you change the massage mode within the 10 minutes, the timer will
count-down from the original leftover time.
You should feel a strong but
11