Franke ATMOS 604 Mode D'emploi Et Installation page 24

• To fit the Hood in wall units deep 330mm,
use the spacers A and B
• Mount the spacer A; the spacer B
grabs the A, then fix it as shown in the figure with screws (Ø4x6)
• The number of the screws depends on the lenght
of the Hood (56/86/116)
• To fit the Hood in wall units deep 340-360mm,
use the spacers A, B and C
• Mount the spacer A; then the spacer B
as shown in the figure with screws (Ø4x6)
• In closing, mount the spacer C with screws (Ø4x6)
• The number of the screws depends on the lenght
of the Hood (56/86/116)
C
GB
Wall Unit 330 mm
Wall Unit 340-360 mm
21