Working With The Machine; Accessories - Festool VECTURO OS 400 EQ Guide D'utilisation

 The protection (against accidental contact) on
the saw blade may become twisted if wear has
occurred, see fig. [4]
4
1
3x
Observe the following instructions:
– Only guide the power tool towards the workpiece
when it is switched on.
– A significant increase in the force required to ad-
vance the machine and slow working progress
are indicators that the blades are worn.
WARNING
Risk of injury

Always pull the mains plug out of the socket be-
fore performing work on the machine such as
changing and adjusting accessories!
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
12
3x
2
3
4
3x

Working with the machine

3x
5
– Hold the machine by the gripping surface [1-5]
with both hands to ensure safe guidance. Do not
cover the cooling air openings [1-6] with your
hand. Otherwise there is a risk of the machine
overheating.
– Always secure the workpiece in such a manner
that it cannot move while being processed.

Accessories

the quality of your results and limit warranty
claims. Machine wear or your own personal work-
load may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
Always use original Festool tools and accessories.
Using low-quality tools or accessories from other
manufacturers may increase the risk of injury and
cause serious machine imbalance that decreases
the quality of the working results and accelerates
machine wear.