Metabo CED 125 Notice Originale page 13

- Move the guide rail adapter and adjust the play.
- Tighten the screws of the guide rail adapter again
(8).
For a complete range of accessories, see
www.metabo.com or the catalogue.
10. Repairs
Always have your guard repaired by qualified
personnel only using genuine spare parts.
This will ensure that the safety of the guard is
maintained.
Contact your local Metabo representative if you
have Metabo guards requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
11. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
To protect the environment, do not dispose of
power tools with household waste. Observe
national regulations on separated collection
and recycling of disused machines, packaging and
accessories.
12. Technical Specifications
The maximum diameter of the diamond cutting disc
is 125 mm (5").
The maximum permitted thickness of the diamond
cutting disc is 6 mm (1/4").
Do not use any segmented diamond cutting
discs with segment slits >10 mm. If using
segmented diamond cutting discs, only a negative
segment cutting angle is permitted.
ENGLISH en
13