GigaAir 2020 Mode D'emploi page 34

Setting Up-Receiver Setting Up-Receiver Setting Up-Receiver
Setting Up-Receiver Setting Up-Receiver
Connecting to a TV With an Audio/Video Component
Receiver
Audio/Video
Component
Plug one end of the provided power adapter into a wall outlet and the other end into the rear of
3
the receiver.
4
Turn the ON/OFF switch to the ON position. The LED on the front of the unit should light.
Place the receiver in a convenient location, then adjust its antenna so that the front (curved face)
5
faces the room where the transmitter is set up. See "Orienting Units for Optimal Performance",
on page 15.
10
VIDEO AUDIO
RF OUT
VHF/UHF
TV