GigaAir 2020 Mode D'emploi page 27

Power Indicator LED
1
The LED should be lit when the ON/OFF switch is in the ON position..
2.4GHz Audio/Video Antenna (Front )
2
Transmits and receives Audio/Video signals. Caution: Antenna does not rotate freely 360 degrees. (See
"Orienting Units for Optimal Performance", on page 15)
3 IR Emitter Port
4 Channel Selection Switch
Select the channel by sliding the slide switch to the channel number you want.
Must select the same channel both on transmitter and receiver.
5
Left Audio Jack (White)
6 Right Audio Jack (Red)
Video Jack (Yellow)
7
9V Power Adapter Plug
8
ON/OFF Switch
9
Channel Selection Dipswitches
10
Select the channel by setting the channel dipswitch to the ON position. The number 5 dipswitch
sets the timer for the auto-sequence function (see "Auto-Sequence Function for Multiple Location
Monitoring", on page 16).
Must select the same channel both on transmitter and receiver.
Product Layout Product Layout Product Layout
Product Layout Product Layout
3