Setting Up-Receiver - GigaAir 2020 Mode D'emploi

Setting Up-Receiver

Setting Up-Receiver Setting Up-Receiver
Setting Up-Receiver Setting Up-Receiver
Connecting the Receiver to a TV Connecting the Receiver to a TV Connecting the Receiver to a TV
Connecting the Receiver to a TV Connecting the Receiver to a TV
1 1 1 1 1 Connect one set of audio/video cables to the audio/video jacks of the receiver, matching the
plug colors with the jacks on the receiver.
Connect the other end of the cable to the audio/video jacks on the TV labeled LINE IN,
2
matching the plug colors with the jacks on the TV. Some connection scenarios are shown on
the next page.
Note: For PAL systems, the connector on the audio/video component is a Scart socket.
Connect the Scart connector labeled RECEIVER to the Scart socket labeled IN on the
audio/video component; connect the RCA connector to the receiver.
8
Receiver
TV
RCA to Scart Cable
Receiver