Samsung HW-H7500 Mode D'emploi page 9

REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
HW-H7500_H7501_XU_ENG_20141022.indd 9 HW-H7500_H7501_XU_ENG_20141022.indd 9
SOURCE
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
Press to set the Repeat function during music playback from a USB device.
REPEAT OFF : Cancells Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the $ button, the next file is selected.
AUDIO SYNC
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the AUDIO SYNC buttons to sync the audio
with the video. Use the #,$ buttons to set the audio delay between 0
ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not work.
Anynet+
Press the Anynet+ button to turn the Anynet+ function on or off.
(Auto Power Link : Default OFF, Anynet+ ON / Power Link OFF or Anynet+
OFF / Power Link ON) The Anynet+ function lets you control the Soundbar
with the remote from an Anynet+ compatible Samsung TV. The Soundbar
must be connected to the TV via an HDMI cable.
* Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the
Optical jack so it turns on automatically when you turn on your TV.
(See page 24)
9
REMOTE CONTROL
2014-10-22 2014-10-22 11:20:42 11:20:42