Samsung HW-H7500 Mode D'emploi page 12

INSTALLATION
INSTALLATION
● This Soundbar can be compatible with 2014
HU7, HU8 and HU9 series of Samsung UHD
curved TVs (except HU7100 models). For a
detailed list of compatible TV models, please
refer to the Samsung web site.
TV-MOUNTED INSTALLATION
For a TV-mounted installation with a physically
compatible, wall-mounted Samsung TV.
NOT recommended for installation on curved TVs
78" or larger.
● The TV-mounted installation is for compatible
wall-mounted Samsung TVs only and
requires that you remove the TV's stand. If
you remove the TV's stand and replace it with
the Curved Soundbar, and then stand the TV
on a flat surface, the TV may tip over.
● Do not place objects on top of the Soundbar
if it is TV mounted.
1. Place the Soundbar as shown in the illustration,
ensuring that none of its buttons touch the surface it
is lying on.
2. Fasten the four Holder-Screws 1 and four of the
Holder-Screws 2 to the four holes in the Soundbar,
as shown in the illustration.
HW-H7500_H7501_XU_ENG_20141022.indd 12 HW-H7500_H7501_XU_ENG_20141022.indd 12

3. Place the TV screen-side down on the curved
packaging foam that came with the TV.
● Do not place the TV screen-side down on a
flat surface. You can crack the panel.
4. Remove the TV's stand if the stand is attached, and
then insert the bracket guide into the notches on the
bottom of the TV. Make sure the screw holes in the
Bracket-Mount line up with the screw holes in the
TV.
5. Fasten the Bracket-Mount to the TV using the
remaining 4 Holder-Screws 2.
6. After attaching the Bracket-Mount, mount the TV on
the wall.
● When handling a TV, do not touch the screen
and do not subject it to excessive pressure or
a sudden impact.
12
2014-10-22 2014-10-22 11:20:45 11:20:45