Frozen Vegetable; Dinner Plate - Danby DMW07A1SLDD Guide D'utilisation Et D'entretien

FROZEN VEGETABLE

BEVERAGE

DINNER PLATE

PIZZA
MEMORY CLOCK
OPERATING INSTRUCTIONS
a) Press " FROZEN VEGETABLE " repeatedly until the number you wish
appears in the display, "4.0","8.0","16.0" oz will display in order.
For example, press "FROZEN VEGETABLE" once , "4.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once.When cooking is
fi nished,buzzer will sound fi ve times and then turn back to waiting state.
a) Press " BEVERAGE " repeatedly until the number you wish appears in the
display, "1","2","3" cup will display in order. One cup is about 120ml.
For example, press "BEVERAGE" once , "1" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking is
fi nished, the buzzer sounds fi ve times and then turns back to waiting state.
a) Press " DINNER PLATE " repeatedly until the number you wish appears in
the display, "9.0","12.0","18.0" oz will display in order.
For example, press "DINNER PLATE" once , "9.0" appears.
b) Press " START/+30 SEC " to cook, buzzer sounds once. When cooking
fi nishes, buzzer will sound fi ve times and then turn back to waiting state.
a) Press " PIZZA " repeatedly until the number you wish appears in the display,
"4.0","8.0","14.0" oz will display in order.
For example, press "PIZZA" once , "4.0" appears.
b) Press " START/+30 SEC " to cook, buzzer will sound once. When cooking
fi nishes, the buzzer will sound fi ve times and then turn back to waiting state.
(1) Press "0/MEMORY" to choose memory 1-3 procedure. The LED will display 1,2,3.
(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to
set the procedure. Only one or two stages can be set.
(3) After fi nishing the setting, press "START/ +30 SEC." once to save the procedure and
turn back to the waiting states.If press " START/ +30 SEC." again,it will start cooking.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice,stop pressing until the screen displays "2".
b. Press "TIME COOK" once,then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "START/+30SEC." again, the procedure will be saved as
the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press "0/MEMORY" twice,
screen displays "2", then press "START/+30SEC." to run.
11