Gardeo PRO GBV2502LW Traduction Des Instructions D'origine page 31

Power tool use and care
• Do not expect the power tool to do more than it can.
Use the correct power tool for what you want to do.
A power tool will achieve better results and be safer
if used in the context for which it was designed.
• Do not use the power tool if the switch cannot turn it
on and off. A power tool with a broken switch is dan-
gerous and must be repaired.
• Disconnect the plug from the power source before
making adjustments, changing accessories, or stor-
ing power tools. Such preventive safety measures
reduce the risk of starting the power tool acciden-
tally.
• Store power tools, when not in use, out of the reach
of children and do not allow people who are not fa-
miliar with the power tool or these instructions to op-
erate it. Power tools are potentially dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment or
jammed moving parts, breakages or any other fea-
ture that might affect the operation of the power tool.
If it is damaged, the power tool must be repaired.
Many accidents are caused by using poorly main-
tained power tools.
• Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to jam and are easier to control.
• Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in
the manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
• Your ower tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
Additional Safety Rules For Shredders
• Wear protective gloves, protective glasses and hear-
ing protectors. Avoid loose clothing.
• Always stand steadily and in balance. Do not stretch
towards the machine.
• During use, the machine should be level and on a
firm surface.
• Ensure that all screws and nuts are properly tight-
ened before use.
• Only use the machine in dry conditions and never
use outdoors when it is raining.
• Never use the machine with damaged safety devic-
es or without protection.
• Keep hands, other parts of our body and clothing
away from the feeding hopper and the discharge
chute.
• Keep your face and the rest of your body away from
the feeding hopper.
• Do not leave the machine unsupervised, switch off
the motor and disconnect the plug.
• Hard objects such as stones, bottle, cans or pieces
of metal must not be fed into the inlet chute. This
can cause damage to the machine.
• If the machine becomes blocked, stop the motor and
disconnect the plug. Pull out any objects and check
for damage.
• If the fuse blows or if the overload protection is trig-
gered, this is a sign that the machine is overloaded
and/or that too many appliances are connected to
the same extension cable.Check the cause and rem-
edy. Do not install a more powerful fuse.
• Do not tug on the extension cable. Do not hold the
cable taut. This can cause damage in the plugs or in
the cables insulation. Such damage is invisible but
can be dangerous.
• Always keep the extension cable away from the ma-
chine. Disconnect the plug from the electric socket
and check the cable regularly for signs of damage
or aging. Do not use the machine with a damaged
extension cable.
• If the cable is damaged, it must be replaced by an
authorized service centre in order to avoid a hazard.
• Never move the machine by pulling the cable. The
machine must not be moved with the motor running.
• The shredder must be assembled correctly before
use.
Warning! This appliance must be earthed!
Warning! Use only three core extension cables
with the earth wire connected
4