Gardeo PRO GBV2502LW Traduction Des Instructions D'origine page 27

Maintenance and Storage
When the machine is stopped for servicing,
D
inspection, or storage, or to change an ac-
cessory, switch off and remove the plug
from the mains supply and allow the ma-
chine to cool. Make sure that all moving
parts have come to a complete stop before
making any inspections, adjustments, etc.
Maintain the machine with care and keep it
D
clean.
Examine the machine and replace worn or
D
damaged parts for safety.
Ensure replacement parts fitted are GARDEO
D
approved.
If an extension cord is used it shall not be
D
of lighter grade than the supply cord al-
ready fitted to the machine.
Check the supply and any extension cord
D
regularly for damage or signs of ageing. Do
not use the machine,
if the cords are damaged.
When servicing the cutter be aware that,
D
even though the motor will not start due to the
interlock feature of the guard, the cutter can still
be moved if the motor is turned
by hand.
Never attempt to override the interlock
D
feature of the guard.
3