JVC KD-AR5000 Manuel D'instructions page 50

• "No Files" appears for a while, then the
disc ejects.
] The current MP3/WMA disc does not
contain any MP3/WMA tracks.
• "No Music" appears.
] No MP3/WMA tracks are included in the
folder. Skip the folder.
] Only <jll> and/or <jla> files are recorded
on the disc.
• Correct characters are not displayed (ex.
album name).
] This unit can only display a limited
number of special characters (see the
tables on page 48).
Graphics
• Download does not seem to finish.
] If you are trying to download an
animation of many frames, it takes a quite
long time (see page 48).
• Animation does not move.
] Temperature in the car compartment is
very low—
the operating temperature resumes—until
goes off.
• The entire animation has not been
downloaded.
] "OPENING" and "ENDING" can only
memorize 30 frames of the animation
even it includes 90 frames.
Preferred Setting Modes—PSM
• "Movie" category settings in the PSM do
not take effect.
] Temperature in the car compartment is
very low—
the operating temperature resumes—until
goes off.
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit
and the disc, but will be annoying.
It is recommend to stop disc play while driving on such rough roads.
50
appears. Wait until
appears. Wait until
• "Opening" and "Ending" cannot be
selected.
] If "KeyIn CFM" is set to "Off," you
cannot select them.
• You cannot select an image for "UserPict."
("---------" appears for the file name on the
lower part of the display.)
] You can select an image only after
downloading the appropriate files in
memory.
External component operations
• The external component you want is not
selected for the playback source.
] Select the appropriate source for the "Ext
Input" setting.
CD changer operations
• "No Magazine" flashes.
] Magazine is not loaded in the CD
changer.
• "No Disc" flashes.
] No discs are in the magazine or the discs
are inserted upside down.
• "Reset 01" — "Reset 07" flashes.
] The built-in microcomputer in the CD
changer is malfunctioning. Press the reset
button of the CD changer.
• "Reset 08" flashes.
] This unit is not connected to a CD
changer correctly. Connect this unit and
the CD changer correctly and press the
reset button of the CD changer.