Publicité
Les langues disponibles
Les langues disponibles
9
MAINTENANCE AND CARE
Before each use, look for nicks, gouges, cuts, cracks, bends, corrosion or other damage that can be the result of improper use
or accidental damage. For instance, this could occur if someone else used the treestand without knowledge of its proper use,
or if the treestand were dropped, hit by a motor vehicle or subject to corrosive conditions, etc.
The Quick Draw Pro Device must lock into place behind the cable. If the Quick Draw Pro Device does not lock into place
behind the cable stop as shown in figures 11 and 12c, DO NOT USE THE TREESTAND since the cable is not secured and
may result in a user to fall which could cause serious injury or death! Contact Summit to obtain the proper corrective action.
•
The seat on this treestand is removable. It is mandatory that it be removed and stored in a dry place when not in use.
Replace every two (2) years or sooner if damage or wear is present or if it appears faded.
•
It is VERY IMPORTANT to inspect all cables to ensure that there is no sign of corroded, frayed, damaged or broken strands.
DO NOT USE IF THE CABLES HAVE BROKEN OR DAMAGED METAL STRANDS!
Call immediately to order a replacement if this should occur.
Replace all cables after five (5) years or sooner if any sign of fraying,broken strands, or corrosion.
•
Replace the green tourniquet strap after one (1) year from the date of sale to the consumer or sooner if any fading, frays, rips, tears, cuts
or other damage is present.
•
It is VERY IMPORTANT to inspect umbilical cord prior to each use. Replace every two (2) years or sooner if any sign of fading, frayings,
nicks, cuts, tears, or discoloration is present. Visit www.summitstands.com immediately to order a replacement if this should occur.
•
When not in use, store your treestand in a dry place - tree teeth pointing down - to keep water from pooling inside the stand tubing.
Water that is allowed to fill the stand tubing and freeze will rupture the tubing.
•
The powdercoat finish applied at the factory is very durable and should only need touch ups in areas of heavy wear or accidental impact.
Use a high quality, outdoor spray paint to cover any bare metal areas that might develop.
•
The sole purpose of the plastic coating on the cable is to eliminate noise. After some use you may notice some abrasions, peeling or
possibly cuts in the coating. This coating does not affect the performance or safety of your treestand. It is there to eliminate unnecessary
noise when sliding the cable down into the tubing. Replacement tubes can be purchased at www.summitstands.com
•
When transporting your Summit Treestand be sure it is securely tied down and be sure no other objects can slide into or hit the treestand
possibly causing damage.
•
NEVER use your climbing treestand for anything other than what it was designed for. This is a climbing treestand to be used on a tree for
the purpose of hunting only.
Should you damage any part of your Summit Treestand, contact your nearest authorized Summit dealer or the factory to obtain the proper
corrective action procedure and/or replacement parts for the treestand.
Summit Treestands have the highest structural integrity by design, material selection and manufacturing techniques, but as its owner, only
your continued care will assure trouble free performance. When the above-mentioned guidelines are followed, your Summit Treestand will
provide years of successful hunting.
PG 16
WARNING
!
WARNING
!
www.summitstands.com
Publicité
