auna IR-260 Mode D'emploi page 48

EN
DAB+ OPERATION
On the main screen, select DAB/DAB+ mode using the navigation knob or
the navigation buttons on the remote control. The first time you use DAB
mode, the unit will start searching for DAB stations. The screen displays
[Scanning]. While scanning, the screen shows how many stations have
already been found.
When all available stations are found, the screen displays the selection of
available stations. Scroll through the list using the navigation knob or the
navigation buttons on the remote control and select the desired station.
When you have selected a station, press the navigation knob to play it.
To select the previous or next station, use the navigation knob to scroll
forward or backward accordingly.
To return to the station list or to scroll manually, press the [<] button. To
scan for stations again, go to the DAB station list page and [Delete station
list?] Select „Yes" to scan for stations again.
When you are on a particular station, press the [>] button to display
additional information about the station. The screen automatically scrolls
through the information and displays Genre, MHz, songs played, KHz and
Kbps.
Storing DAB/DAB+ Stations
When you have turned on your desired station, press and hold the FAV
button for a few seconds to access the [Add to my Favorites] screen. Turn
the navigation knob to select the desired memory number (up to 99).
Alternatively, if you are on the DAB station list page, you can highlight the
selected station and press and hold the FAV button to access the [Add to
my Favorites] screen.
Recalling Saved DAB/DAB+ Stations
When you are in DAB/DAB+ mode, you can access your favourite station by
pressing the FAV key and using the navigation knob to scroll through the
stored stations.
48